Kawasaki Ninja Service Manual: Air Cleaner Element Inspection

Kawasaki Ninja Service Manual / Fuel System (DFI) / Air Cleaner / Air Cleaner Element Inspection

If the element has any tears or breaks, replace the element.

Air Cleaner Element Inspection


Air Cleaner
Air Cleaner Element Removal/Installation Refer to the Air Cleaner Element Replacement in the Periodic Maintenance chapter. ...

Air Cleaner Oil Draining
A drain hose is connected to the bottom of the air cleaner to drain water or oil accumulated in the cleaner part. Visually check the drain hose [A] if the water or oil accumulates. If any wate ...

Other materials:

Steering Damper Installation
Install the following parts as shown in the figure. Collar [A] Washer (t = 3.5 mm, 0.14 in.) [B] Steering Damper [C] ( ZX1000JC/KC) Electronic Steering Damper [D] (ZX1000JD/KD) Washer (t = 1.2 mm, 0.05 in.) [E] Apply a non-permanent locking agent to the threads of the steering ...

Water Temperature Sensor Inspection
Remove the water temperature sensor (see Water Temperature Sensor Removal/Installation in the Fuel System (DFI) chapter). Suspend the sensor [A] in a container of coolant so that the temperature-sensing projection [C] is submerged. Suspend an accurate thermometer [B] with temperature ...

Upper Fairing Assembly Disassembly
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal) Headlight (see Headlight Removal/Installation in the Electrical System chapter) City Light (LED) (see City Light (LED) Removal/Installation in the Electrical System chapter) Remove the screws [A], and separate each ...