Push in the ducts [B] touch the stoppers [C] of the throttle body.
Be sure the hoses are routed correctly and properly installed.
Torque - Air Cleaner Housing Clamp Bolts: 2.0 N·m (0.20 kgf·m, 18 in·lb) Air Cleaner Housing Assembly Screws [D]: 1.1 N·m (0.11 kgf·m, 10 in·lb)
Air Cleaner Housing Removal
Air Cleaner Housing DisassemblyBattery Removal
Remove the rider’s seat (see Seats
section in the GENERAL INFORMATION
chapter).
Turn the ignition switch to “OFF” and
disconnect the (–) cable from the battery.
Remove the red cap form the (+) terminal,
and disconnect the (+) cables
from the battery.
NOTE
The battery is ...
Check 2-1: Speedometer Inspection
Using the suitable stand, raise the rear wheel off the
ground.
Rotate the rear wheel by hand or start the engine.
Check that the display changes speedometer.
If the display function does not work, check the following
parts.
Rear Wheel Rotation Sensor (see Wheel Rotation Sensor
Inspe ...
Warning Symbols
: The red
warning indicator light
and the oil pressure warning symbol
( )
goes on whenever the oil pressure
is dangerously low or the ignition switch is in the “ON” position with the
engine not running, and go off when the
engine oil pressure is high enough. Refer
to the Mainten ...