Kawasaki Ninja Service Manual: Air Intake Duct Removal

Air Line

...

Air Intake Duct Installation

Check that the pad [A] is in place on the air intake duct. Apply a non-permanent locking agent to the threads of the air intake duct mounting bolts, and tighten them. Run the lead correctly ( ...

Other materials:

Upper Fairing Assembly Removal
Remove: Lower Fairings (see Lower Fairing Removal) Center Inner Fairing (see Center Inner Fairing Removal) Upper Inner Fairings (see Upper Inner Fairing Removal) Windshield (see Windshield Removal) Disconnect the front turn signal light lead connector [A] (both sides). Remove the bo ...

Intake Air Temperature Sensor Output Voltage Inspection
NOTE Be sure the battery is fully charged. Turn the ignition switch to OFF. Remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI) chapter). Disconnect the intake air temperature sensor connector and connect the measuring adapter [A] between these connectors as shown in ...

Air Intake Duct Disassembly (Other than US, CA and CAL Models)
Remove: Air Intake Duct (see Air Intake Duct Removal) Seal [A] and Screen [B] Turn the air intake valve actuator [C] counterclockwise (90°). Remove the shaft [A] of the air intake valve actuator. Remove: Pad [A] Screws [B] Air Intake Valve [C] ...