Kawasaki Ninja Service Manual: Air Suction Valve Installation

Air Suction Valve Removal

Remove: Air Switching Valve (see Air Switching Valve Removal) Air Suction Valve Cover Bolts [A] (Both Sides) Air Suction Valve Covers [B] (Both Sides) Remove the air suction valves ...

Air Suction Valve Inspection

Remove the air suction valve (see Air Suction Valve Removal). Visually inspect the reeds [A] for cracks, folds, warps, heat damage or other damage. If there is any doubt as to the condition ...

Other materials:

Camshaft Installation
NOTE The exhaust camshaft has a 1001 EX mark [A] and the intake camshaft has a 3154 IN mark [B]. Be careful not to mix up these shafts. Install the camshaft sprockets as shown in the figure. #4 Cam Positions [A] Intake Camshaft Sprocket [B] Exhaust Camshaft Sprocket [C] The int ...

Cylinder Head Warp Inspection
Clean the cylinder head. Lay a straightedge across the lower surface of the cylinder head at several positions. Use a thickness gauge [A] to measure the space between the straightedge [B] and the head. Cylinder Head Warp Standard: – – – Service Limit: 0.05 mm (0.0020 in.) ...

Exhaust Pipe Installation
Replace the exhaust pipe gaskets [A] and premuffler chamber gasket [B] with new ones. Install the premuffler chamber gasket to the premuffler chamber [C] until it is bottomed so that the chamfer side faces exhaust pipe [D]. Install the exhaust pipe clamp [E] as shown in the figure. I ...