Kawasaki Ninja

Kawasaki Ninja Service Manual: Axle Inspection

Kawasaki Ninja Service Manual / Wheels/Tires / Wheels (Rims) / Axle Inspection

If the axle is damaged or bent, replace it.

If axle runout exceeds the service limit, replace the axle.

Axle Inspection


Axle Runout/100 mm (3.94 in.) Standard: TIR 0.03 mm (0.0012 in.) or less

Service Limit: TIR 0.2 mm (0.008 in.)

Wheel Inspection
Raise the front/rear wheel off the ground. Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 Spin the wheel lightly, and check for roughness or binding. If roughness or bi ...

Balance Inspection
Remove the front and rear wheels (see Front/Rear Wheel Removal). Support the wheel so that it can be spun freely. Spin the wheel lightly, and mark [A] the wheel at the top when the wheel st ...

Other materials:

Kawasaki Intelligent anti-lock Brake System (KIBS, For models equipped with KIBS)
KIBS regulates anti-lock braking performance with more precision during sports riding compared to a conventional ABS system. KIBS is designed to help prevent the wheels from locking up when the brakes are applied hard while riding straight. KIBS automatically regulates brake force using en ...

Clutch Removal
Remove: Clutch Cover (see Clutch Cover Removal) Clutch Spring Bolts [A] Clutch Springs (with Clutch Spring Holders) Clutch Spring Plate [B] Pusher [C] Remove: Friction Plates (10) [A] Steel Plates (9) [B] Spring [C] Spring Seat [D] Hold the sub clutch hub [A] ...

Meter Unit Inspection
Remove the meter unit (see Meter Unit Removal). [1] Battery (+) [2] Fuel Reserve Switch [3] Ground (–) [4] Unused [5] Right Turn Signal Indicator Light (LED) (+) [6] Left Turn Signal Indicator Light (LED) (+) [7] High Beam Indicator Light (LED) (+) [8] Neutral Indicator Light (LED) (в ...