If they appear damaged or deteriorated, replace them.
Battery Removal
Turn off the ignition switch.
Remove the front seat (see Front Seat Removal in the
Frame chapter).
Slide the red cap [A].
Disconnect the negative (–) cable [B] and then positive
(+) cable [C].
NOTICE
Be sure to disconnect the negative (–) cable first.
Remove the band [D] ...
Engine Installation
Apply molybdenum disulfide grease to the threads of the
adjusting collars [A].
Install the adjusting collars to crankcase backside until
end of the threads.
Install the adjusting collar [A] to the frame until end of the
threads.
Replace the engine mounting nuts with ne ...
Stopping the engine
Close the throttle completely.
Shift the transmission into neutral
Turn the ignition key to “OFF”.
Support the motorcycle on a firm,
level surface with the side stand.
Lock the steering.
NOTE
The motorcycle is equipped with a
vehicle-down sensor, which causes
the engine to sto ...