NOTE
For the engine fasteners, check the tightness of them when the engine is cold (at room temperature).
Refer to the appropriate chapter for torque specifications.
If torque specifications are not in the appropriate chapter, see the Standard Torque Table. For each fastener, first loosen it by 1/2 turn, then tighten it.
Bolt, Nut and Fastener to be checked
Engine:
Clutch Lever Pivot Bolt Locknut
Engine Mounting Bolts and Nuts
Exhaust Pipe Clamp Bolt
Exhaust Pipe Holder Nuts
Muffler Body Clamp Bolt
Muffler Body Mounting Bolt
Premuffler Chamber Bracket Bolt
Premuffler Chamber Mounting Bolt
Radiator Bolts
Wheels:
Front Axle Clamp Bolts
Front Axle Nut
Rear Axle Nut
Rear Axle Nut Cotter Pin
Brakes:
Brake Lever Pivot Bolt and Locknut
Brake Pedal Bolt
Caliper Mounting Bolts
Front Master Cylinder Clamp Bolts
Rear Master Cylinder Mounting Bolts
Rear Master Cylinder Push Rod Joint Cotter Pin
Suspension:
Front Fork Clamp Bolts
Rear Shock Absorber Nuts
Swingarm Pivot Shaft Nut
Tie-Rod Nuts
Rocker Arm Nut
Steering:
Handlebar Clamp Bolts
Steering Stem Head Nut
Others:
Footpeg Bracket Bolts
Front Fender Mounting Bolts
Rear Frame Bolts
Sidestand Bolt
Sidestand Bracket Bolts
Intake Air Temperature Meter
Intake air temperature meter indicates
temperature of the air in the air
cleaner case.
The “Intake Air” is displayed if the intake
air temperature meter is selected.
A. Intake Air Temperature Meter
B. “Intake Air”
NOTE
The intake air temperature meter
shift to the coolant temp ...
Footpeg
Footpeg Height Adjustment
The front footpeg can be adjusted within 2 positions in
height to suit the rider’s preference.
Footpeg [A]
Bolts [B]
Bolt Holes [C]
Footpeg Position 1 [D]
Footpeg Position 2 [E]
Remove the bolts [A].
Adjust the footpeg height.
NOTE
In ...
Crankshaft Installation
NOTE
If the crankshaft is replaced with a new one, refer to
the Connecting Rod Big End Bearing/Crankshaft Main
Bearing Insert Selection in the Specifications.
NOTICE
If the crankshaft, bearing inserts, or crankcase
halves are replaced with new ones, select the bearing
inserts and check cleara ...