Kawasaki Ninja Service Manual: Brake Disc

Kawasaki Ninja Service Manual / Brakes / Brake Disc

Master Cylinder Inspection (Visual Inspection)
Remove the master cylinders (see Front/Rear Master Cylinder Removal). Disassemble the front and rear master cylinders (see Master Cylinder Rubber Parts Replacement in the Periodic Maintenan ...

Brake Disc Removal
Remove the wheels (see Front/Rear Wheel Removal in the Wheels/Tires chapter). Unscrew the mounting bolts [A], and take off the disc [B]. ...

Other materials:

Rider’s Seat Removal
Remove the bolts and seat cover. A. Bolts B. Seat Cover Remove the mounting bolts and pull off the seat upward. A. Mounting Bolts B. Rider’s Seat ...

Upper Crankcase Assembly
When installing the breather plate, replace the gasket [A] with a new one. Apply a non-permanent locking agent to the threads of the bolts [A] and tighten them. Torque - Breather Plate Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb) Install the fitting [A] until it is bottomed ...

Exploded View
AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque. HG: Apply high-temperature grease. R: Replacement Parts WL: Apply soap and water solution or rubber lubricant. Specifications WARNINGSome replacement tires may adversely affect h ...