Drive Chain Removal/Installation
NOTE
Since the drive chain is installed through the swingarm,
The chain can not be removed other than by cutting it.
Prepare the new link pin, link plate, grease seals, and
tools for rejoining the chain.
Remove:
Bolts [A]
Front Footpeg Bracket [B]
Remove:
Bolts [A]
Chain Cover [B]
...
Camshaft Installation
NOTE
The exhaust camshaft has a 1001 EX mark [A] and the
intake camshaft has a 3154 IN mark [B]. Be careful not
to mix up these shafts.
Install the camshaft sprockets as shown in the figure.
#4 Cam Positions [A]
Intake Camshaft Sprocket [B]
Exhaust Camshaft Sprocket [C]
The int ...
Alternator Cover Installation
Using a high flash-point solvent, clean off any oil or dirt
that may be on the silicone sealant coating area. Dry
them with a clean cloth.
Apply silicone sealant to the alternator lead grommet and
crankcase halves mating surface [A] on the front and rear
sides of the cover mount.
Sea ...