Kawasaki Ninja Service Manual: Caliper Piston and Cylinder Damage

Kawasaki Ninja Service Manual / Brakes / Calipers / Caliper Piston and Cylinder Damage

Visually inspect the pistons [A] and cylinder surfaces [B].

Replace the caliper if the cylinder and piston are badly scores or rusty.

Front Caliper [C] Rear Caliper [D]

Caliper Piston and Cylinder Damage

Rear Caliper Dust Boot and Friction Boot Damage

Check that the dust boot [A] and friction boot [B] are not cracked, worn, swollen, or otherwise damaged. If they show any damage, replace it. ...

Rear Caliper Holder Shaft Wear

The caliper body must slide smoothly on the caliper holder shafts [A]. If the body does not slide smoothly, one pad will wear more than the other, pad wear will increase, and constant drag on the d ...

Other materials:

Fuel Hose Replacement
Remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI) chapter). WARNINGFuel is flammable and explosive under certain conditions and can cause severe burns. Be prepared for fuel spillage; any spilled fuel must be completely wiped up immediately. When the fue ...

Wiring Diagram (US, CA and CAL without KIBS Models)
ZX1000JC ZX1000JD ...

Exploded View
25. “1T” marked side faces up. 26. “T2” marked side faces up. 27. Hollow mark faces exhaust side. G: Apply grease. L: Apply a non-permanent locking agent. LG: Apply liquid gasket. M: Apply molybdenum disulfide grease. MO: Apply molybdenum disulfide oil solution. ...