Kawasaki Ninja Service Manual: Calipers

Brake Pedal Installation

Apply grease to the brake pedal pivot shaft [A]. Install: Washers [B] Brake Pedal [C] Apply a non-permanent locking agent to the threads of the brake pedal mounting bolt [D], and tighten ...

Front Caliper Removal

Remove: Bolt [A] Front Wheel Rotation Sensor [B] Loosen the banjo bolt [C] at the brake hose lower end, and tighten it loosely. Unscrew the caliper mounting bolts [D], and detach the ca ...

Other materials:

ZX1000JB/KB Models
1. Run the fuse box 2 lead in front of the rib for the fuse box 2. 2. Seat Lock Cable 3. Hook the licence plate light lead and the left turn signal light lead on the projection of the tool kit case. 4. Rib for Fuse Box 2 5. Run the starter relay lead in back of the rib for the fuse box 2 ...

Balancer Assemble
Apply molybdenum disulfide oil solution to the ribs of the balancer [A]. Apply molybdenum disulfide oil solution to the ribs of the balancer gear [A]. Check that the rubber dampers [B] are in place. Face the linked portion [C] to the bottom. Assemble the balancer weight ...

Brake Fluid Leak (Brake Hose and Pipe) Inspection
For KIBS equipped models, remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI) chapter). Apply the brake lever or pedal and inspect the brake fluid leak from the brake hoses [A], pipes (KIBS equipped models) [B] and fittings [C]. If the brake fluid leaked from any posit ...