Kawasaki Ninja Service Manual: Charging System

Kawasaki Ninja Service Manual / Electrical System / Charging System

Refreshing Charge
Remove the battery (see Battery Removal). Do refresh charge by following method according to the battery terminal voltage. WARNINGThis battery is sealed type. Charge with current ...

Alternator Cover Removal
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Air Cleaner Housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter) Bolt [A] ...

Other materials:

KIBS Servicing Precautions
There are a number of important precautions that should be followed servicing the KIBS. This KIBS is designed to be used with a 12 V sealed battery as its power source. Do not use any other battery except for a 12 V sealed battery as a power source. Do not reverse the battery cable connec ...

Rocker Arm Installation
Install the both rocker arms [A] so that their marks [B] face left side. Replace the tie-rod nut, rear shock absorber nut and rocker arm nut with new ones. Apply grease to the inside of the oil seals. Tighten: Torque - Rocker Arm Nut: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod ...

Brake Disc Installation
Install the brake disc on the wheel so that the marked side [A] faces out. Front Brake Discs [B] Rear Brake Disc [C] Apply a non-permanent locking agent to the threads of the brake disc mounting bolts. Tighten: Torque - Brake Disc Mounting Bolts: 27 N·m (2.8 kgf·m, 20 ...