Kawasaki Ninja Service Manual: Check 2-1: Speedometer Inspection

Kawasaki Ninja Service Manual / Electrical System / Meter, Gauge, Indicator Unit / Meter System Inspection / Check 2-1: Speedometer Inspection

If the display function does not work, check the following parts.

Rear Wheel Rotation Sensor (see Wheel Rotation Sensor Inspection in the Brakes chapter) ECU (ECU Power Supply Inspection in the Fuel System (DFI) chapter) Wiring (see Meter Unit Circuit)

If the above parts are good, replace the meter unit.

Meter System Inspection
...

Check 2-2: Fuel Level Warning Inspection
Remove: Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter) Connect the resistor(s) [A] (about 50 to 100 Ω) between the fuel pump connector terminal [B] of the main harn ...

Other materials:

Fuel Reserve Switch Inspection
Fill the fuel tank with fuel and close the fuel tank cap. Remove the front seat (see Front Seat Removal in the Frame chapter). Disconnect the fuel pump lead connector [A]. Connect the test light [A] (12 V 3.4 W bulb in a socket with leads) and the 12 V battery [B] to the fuel pu ...

Spark Plug Replacement
Remove the stick coils (see Stick Coil Removal in the Electrical System chapter). Remove the spark plugs using the 16 mm (0.63 in.) plug wrench [A] vertically. Replace the spark plug with new ones. Standard Spark Plug Type: NGK CR9EIA-9 Insert the spark plug vertically into the sp ...

Model Identification
ZX1000JB (US and CA Models) Left Side View ZX1000JB (US and CA Models) Right Side View ZX1000JB (EUR Models) Left Side View ZX1000JB (EUR Models) Right Side View ZX1000KB (US and CA Models) Left Side View ZX1000KB (US and CA Models) Right Side View ZX1000KB (EUR Models) ...