Kawasaki Ninja Service Manual: Check 3-3: High Beam Indicator Light (LED) Inspection

Check 3-1: CAN Communication Line Resistance Inspection

Set the hand tester [A] to the ×1 Ω range and connect it to the terminal [11] and [12] in the meter unit. Special Tool - Hand Tester: 57001-1394 CAN Communication Line Resistance ( ...

Check 3-4: Turn Signal Indicator Light (LED) Inspection

Connect the leads in the same circuit as Check 3-2. Connect the terminal [5] to the battery (+) terminal. Connect the terminal [6] to the battery (+) terminal. Check that the turn sig ...

Other materials:

Tire Installation
WARNINGSome replacement tires may adversely affect handling and cause an accident resulting in serious injury or death. To ensure proper handling and stability, use only the recommended standard tires for replacement, inflated to the standard pressure. Inspect the rim ...

Bolt and Nut Tightening
In accordance with the Periodic Maintenance Chart, it is very important to check the tightness of the bolts and nuts listed here. Also, check to see that each cotter pin is in place and in good condition. Please ask your authorized Kawasaki dealer for torque values. 1. Clutch Lever Hol ...

Swingarm Bearing, Sleeve Inspection
NOTICE Do not remove the bearings for inspection. Removal may damage them. Inspect the needle bearings [A] and ball bearing installed in the swingarm. The rollers and ball in a bearing normally wear very little, and wear is difficult to measure. Instead of measuring, visually inspec ...