Kawasaki Ninja Service Manual: Check 3-4: Turn Signal Indicator Light (LED) Inspection

Check 3-3: High Beam Indicator Light (LED) Inspection

Connect the leads in the same circuit as Check 3-2. Connect the terminal [7] to the battery (+) terminal. Check that the high beam indicator light (LED) [A] goes on. If the indicat ...

Check 3-5: Warning Indicator Light (Red LED) (Oil Pressure Warning) Inspection

Connect the leads in the same circuit as Check 3-2. Connect the terminal [10] to the battery (–) terminal. Check that the oil pressure warning symbol [A] and the warning indicator l ...

Other materials:

Blank Key Detection (Service Code 36, Equipped Models)
Ignition Key Inspection Register the ignition key correctly (see Key Registration in the Electrical System chapter). If the service code 36 appears again, the transponder in the key is malfunction, replace it. Immobilizer System Circuit 1. ECU 2. Ignition Switch 3. Immobilizer Ampl ...

Exhaust Butterfly Valve Cable Removal
Remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI) chapter). Open the clamp [A] and free the cables. Slide the dust covers [B]. Loosen the locknuts [A], and turn the adjusters [B] to give the cable plenty of play. Remove the clamp [A]. Remove the up ...

KIBS Hydraulic Unit Installation
NOTICE Brake fluid quickly ruins painted plastic surfaces; any spilled fluid should be completely washed away immediately. Install the KIBS hydraulic unit together with the bracket. Before installing the brake pipe, check to see that there is no damage on the threads of the brake pipe joi ...