Kawasaki Ninja Service Manual: Clutch

Clutch Cover Assembly

Replace the needle bearings and oil seal with new ones. NOTE Install the needle bearings so that the manufacture’s mark face out. Install the needle bearings [A] and oil seal [B] pos ...

Clutch Removal

Remove: Clutch Cover (see Clutch Cover Removal) Clutch Spring Bolts [A] Clutch Springs (with Clutch Spring Holders) Clutch Spring Plate [B] Pusher [C] Remove: Friction Plates ...

Other materials:

Front Wheel Rotation Sensor Signal Abnormal (Service Code b 42)
Measure the air gap between the front wheel rotation sensor and sensor rotor. Thickness Gauge [A] Air Gap Standard: 0.4 1.6 mm (0.02 0.06 in.) If the measurement is not the standard, check each part for deformation and looseness and correct accordingly. If the measurement is t ...

Special Tools and Sealant
Hand Tester: 57001-1394 Flywheel Puller Assembly, M38 × 1.5/M35 × 1.5: 57001-1405 Peak Voltage Adapter: 57001-1415 Lead Wire - Peak Voltage Adapter: 57001-1449 Key Registration Unit: 57001-1582 Grip: 57001-1591 Flywheel & Pulley Holder: 57001-1605 Rotor Holder: ...

Oil Level Inspection
Check that the engine oil level is between the upper [A] and lower [B] levels in the gauge. NOTE Situate the motorcycle so that it is perpendicular to the ground. If the motorcycle has just been used, wait several minutes for all the oil to drain down. If the oil has just been changed, ...