Special Tool - Clutch Holder: 57001-1243
Use the clutch holder with sharpened hook nose by grinding.
Special Tool - Clutch Holder: 57001-1243
Grind the hook nose by 0.5 mm (0.02 in.) as shown in the figure.
If the oil pump drive gear is to be disassembled, loosen the oil pump drive gear bolt [A] (Left-hand Threads).
City Light (LED) Removal/Installation
Remove:
Upper Fairing Assembly (see Upper Faring Assembly
Removal in the Frame chapter)
Headlight (see Headlight Removal)
Remove the screws [A], and take the city light [B] off the
upper fairing assembly.
Installation is the reverse of removal. Note the following.
When inst ...
Balance Weight Installation
Check if the weight portion has any play on the blade [A]
and clip [B].
If it does, discard it.
WARNINGUnbalanced wheels can create an unsafe
riding
condition. If the balance weight has any play on
the rib of the rim, the blade and/or clip have been
stretched. Replace th ...
Front Fork Inspection
Holding the brake lever, pump the
front fork up and down several times
to inspect smooth stroke.
Visually inspect the front fork for oil
leakage, scoring or scratches on the
outer surface of the inner tube.
If any doubt about the front fork, it
should be checked by an authorized
K ...