Kawasaki Ninja Service Manual: Clutch Spring Free Length Measurement

Kawasaki Ninja Service Manual / Clutch / Clutch / Clutch Spring Free Length Measurement

If any spring is shorter than the service limit, it must be replaced.

Clutch Spring Free Length

Standard: 43.5 mm (1.71 in.)

Service Limit: 42.1 mm (1.66 in.)

Clutch Spring Free Length Measurement


Clutch Plate Warp Inspection
Place each friction plate or steel plate on a surface plate and measure the gap between the surface plate [A] and each friction plate or steel plate [B] with a thickness gauge [C]. The gap is ...

Clutch Housing Finger Inspection
Visually inspect the clutch housing fingers [A] where the friction plate tangs [B] hit them. If they are badly worn or if there are groove cuts where the tangs hit, replace the housing. Also, ...

Other materials:

Exploded View
11. ZX1000JD/KD AD: Apply adhesive. AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque. G: Apply grease. L: Apply a non-permanent locking agent. Specifications ...

Front Fork Removal (Each Fork Leg)
Loosen the front fork top plug [A] beforehand if the fork leg is to be disassembled. Special Tool - Top Plug Wrench (45 mm) [B]: 57001-1741 NOTE Loosen the top plug after loosening the handlebar clamp bolt [C] and upper front fork clamp bolt [D]. Remove: Upper Fairing Assembly (see Up ...

Tire Wear, Damage
As the tire tread wears down, the tire becomes more susceptible to puncture and failure. An accepted estimate is that 90% of all tire failures occur during the last 10% of tread life (90% worn). So it is false economy and unsafe to use the tires until they are bald In accordance with the ...