Kawasaki Ninja Service Manual: Connecting Rod Twist Inspection

Kawasaki Ninja Service Manual / Crankshaft/Transmission / Crankshaft and Connecting Rods / Connecting Rod Twist Inspection

With the big-end arbor [A] still on V block [C], hold the connecting rod horizontally and measure the amount that the arbor [B] varies from being paralleled with the surface plate over a 100 mm (3.94 in.) length of the arbor to determine the amount of connecting rod twist.

If the connecting rod twist exceeds the service limit, the connecting rod must be replaced.

Connecting Rod Twist Service Limit: TIR 0.2/100 mm (0.008/3.94 in.)

Connecting Rod Twist Inspection

Connecting Rod Bend Inspection

Remove the connecting rod big end bearing inserts, and reinstall the connecting rod big end cap. Select an arbor [A] of the same diameter as the connecting rod big end, and insert the arbor t ...

Connecting Rod Big End Side Clearance Inspection

Measure connecting rod big end side clearance. Insert a thickness gauge [A] between the big end and either crank web to determine clearance. Connecting Rod Big End Side Clearance Standard: 0. ...

Other materials:

For Primary Fuel Injectors
Remove the air cleaner housing (see Air Cleaner Housing Removal). Disconnect the primary fuel injector connector [A]. Connect a digital meter to the terminals in each primary fuel injector [A]. Measure the primary fuel injector resistance. Primary Fuel Injector Resistance ...

Wheel Alignment Inspection
Check that the notch [A] on the alignment indicator [B] aligns with the same swingarm mark or position [C] that the other side alignment indicator notch aligns with. If they do not, adjust the chain slack and align the wheel alignment (see Drive Chain Slack Adjustment). NOTE Wheel align ...

Fuel Reserve Switch Inspection
Fill the fuel tank with fuel and close the fuel tank cap. Remove the front seat (see Front Seat Removal in the Frame chapter). Disconnect the fuel pump lead connector [A]. Connect the test light [A] (12 V 3.4 W bulb in a socket with leads) and the 12 V battery [B] to the fuel pu ...