Kawasaki Ninja Service Manual: Crankshaft Sensor Removal

Kawasaki Ninja Service Manual / Electrical System / Ignition System / Crankshaft Sensor Removal

Crankshaft Sensor Removal


Crankshaft Sensor Removal


Crankshaft Sensor Removal


Ignition System
WARNINGThe ignition system produces extremely high voltage. Do not touch the spark plug, ignition coil or ignition coil lead while the engine is running, or you could receive a s ...

Crankshaft Sensor Installation
Apply a non-permanent locking agent to the crankshaft sensor bolts [A]. Tighten: Torque - Crankshaft Sensor Bolts: 5.9 N·m (0.60 kgf·m, 52 in·lb) Using a high flash-point solvent, clea ...

Other materials:

Fuel Tank Removal
WARNINGGasoline is extremely flammable and can be explosive under certain conditions, creating the potential for serious burns. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light. Do not smoke. T ...

Engine Oil Change
Situate the motorcycle so that it is vertical after warming up the engine. Remove the engine oil drain bolt [A] to drain the oil. The oil in the oil filter can be drained by removing the filter (see Oil Filter Replacement). Replace the drain bolt gasket [B] with a new one. Tighten t ...

Inner Tube Inspection
Visually inspect the inner tube [A]. If there is any damage, replace the inner tube. Since damage to the inner tube damages the oil seal, replace the oil seal whenever the inner tube is replaced. NOTICE If the inner tube is badly bent or creased, replace it. Excessive bending, followed by ...