Kawasaki Ninja Service Manual: Cylinder Head Cover

Air Switching Valve Installation

Install the air switching valve [A] with hose [B] as shown in the figure. Front [C] Left Side View [D] White Paint [E] Air Switching Valve Operation Test Refer to the Air Sucti ...

Cylinder Head Cover Removal

Remove: Air Suction Valves (see Air Suction Valve Removal) Throttle Body Assy (see Throttle Body Assy Removal in the Fuel System (DFI) chapter) Stick Coils (see Stick Coil Removal in the El ...

Other materials:

Overview
Kawasaki Intelligent anti-lock Brake System (KIBS) offers enhanced braking stability (ABS performance equivalent to the current model) to supersportmodels, which pitch more than most motorcycles and also offers high-precision front and rear brake pressure control (high-precision ABS) for spo ...

Master Cylinder Inspection (Visual Inspection)
Remove the master cylinders (see Front/Rear Master Cylinder Removal). Disassemble the front and rear master cylinders (see Master Cylinder Rubber Parts Replacement in the Periodic Maintenance chapter). Check that there are no scratches, rust or pitting on the inner wall [A] of each ma ...

DFI Servicing Precautions
There are a number of important precautions that should be followed servicing the DFI system. This DFI system is designed to be used with a 12 V sealed battery as its power source. Do not use any other battery except for a 12 V sealed battery as a power source. Do not reverse the battery ...