Kawasaki Ninja Service Manual: ECU Removal

Kawasaki Ninja Service Manual / Fuel System (DFI) / ECU / ECU Removal

NOTICE

Never drop the ECU especially on a hard surface.

Such a shock to the ECU can damage it.

Remove the upper air cleaner housing (see Air Cleaner Element Replacement in the Periodic Maintenance chapter).
Lift up the ECU [A] with rubber protector [B] to disconnect the connectors [C].

ECU Removal

ECU Installation

Install:

ECU [A] (in Rubber Protector [B])

ECU Connectors

ECU Installation

ECU Identification

Most countries have their own regulations, so each ECU has different characteristic. So, do not confuse ECU with each other and use only the ECU for your model. Otherwise, the motorcycle can ...

ECU Power Supply Inspection

Remove the upper air cleaner housing (see Air Cleaner Element Replacement in the Periodic Maintenance chapter). Visually inspect the ECU connectors. If the connector is clogged with mud or d ...

Other materials:

Starting the Engine
Check that the engine stop switch is in the position. A. Engine Stop Switch B. Starter Button Turn the ignition key to “ON”. Make sure the transmission is in neutral. A. Neutral Indicator Light B. Ignition Switch C. “ON” position NOTE The motorcycle is equipped w ...

Brake Hose and Pipe Replacement
NOTICE Brake fluid quickly ruins painted plastic surfaces; any spilled fluid should be completely washed away immediately. Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Brake Hose Fitting Bolt [A] Brake Hose Banjo Bolts [B] Bolt [C] Clamp ...

Clutch Plate, Wear, Damage Inspection
Visually inspect the friction and steel plates for signs of seizure, overheating (discoloration), or uneven wear. Measure the thickness of each friction plate [A] at several points. If any plates show signs of damage, or if they have worn past the service limit, replace them with new on ...