Kawasaki Ninja Service Manual: Engine No. ZXT00JE003023

Kawasaki Ninja Service Manual / Appendix / Cable, Wire, and Hose Routing / Engine No. ZXT00JE003023

Engine No. ZXT00JE003023


1. Heat Insulation Rubber Plate

2. For Air Switching Valve Hoses (Place the air switching valve above the rubber plate.)

3. For Stick Coils

4. For Throttle Body Assy Holder #2 and #3

5. For Water Temperature Sensor

6. Insert the tab into the slot.

7. For Throttle Body Assy Holder #4

8. For Air Bleeder Hose

9. For Starter Motor Cable

10. For Crankcase Breather Hose

Engine No.  ZXT00JE003022
1. Heat Insulation Rubber Plate 2. For Air Switching Valve Hoses (Place the air switching valve above the rubber plate.) 3. For Air Suction Valve Cover 4. For Throttle Body Assy Holder #2 and ...

US, CA and CAL Models
1. Hold the water hose [A]. Insert the tab into the slot. 2. Hold the water hose [B]. Insert the tab into the slot. 3. Water Hose Fitting on Cylinder Head 4. Heat Insulation Rubber Plate 5. Ru ...

Other materials:

Fuel Tank Removal
WARNINGGasoline is extremely flammable and can be explosive under certain conditions, creating the potential for serious burns. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light. Do not smoke. T ...

Exploded View
25. “1T” marked side faces up. 26. “T2” marked side faces up. 27. Hollow mark faces exhaust side. G: Apply grease. L: Apply a non-permanent locking agent. LG: Apply liquid gasket. M: Apply molybdenum disulfide grease. MO: Apply molybdenum disulfide oil solution. ...

Tightening Sequence
Generally, when installing a part with several bolts, nuts, or screws, start them all in their holes and tighten them to a snug fit. Then tighten them according to the specified sequence to prevent case warpage or deformation which can lead to malfunction. Conversely when loosening the bolts, n ...