Kawasaki Ninja Service Manual: Engine Oil and Oil Filter

Kawasaki Ninja Service Manual / Engine Lubrication System / Engine Oil and Oil Filter

WARNING

Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Check the oil level before each use and change the oil and filter according to the periodic maintenance chart.

Special Tools and Sealant
Oil Pressure Gauge, 10 kgf/cm²: 57001-164 Oil Pressure Gauge Adapter, PT3/8: 57001-1233 Outside Circlip Pliers: 57001-144 Liquid Gasket, TB1211: 56019-120 ...

Oil Level Inspection
Check that the engine oil level is between the upper [A] and lower [B] levels in the gauge. NOTE Situate the motorcycle so that it is perpendicular to the ground. If the motorcycle has just ...

Other materials:

Rear Shock Absorber Scrapping
WARNINGPressurized nitrogen may explode when heated. The rear shock contains nitrogen gas. To avoid an explosion, do not incinerate the shock body without first releasing the nitrogen and removing the shraeder valve. Remove the rear shock absorber (see Rear Shock Ab ...

Turn Signal Switch
When the turn signal switch is pushed to the left ( ) or right ( ), the corresponding turn signals blink on and off. To stop blinking, push the switch in. Horn Button When the horn button is pushed, the horn sounds LAP/Passing Button When the LAP/passing button is pushed, the headlight hi ...

Battery Ground
Before completing any service on the motorcycle, disconnect the battery cables from the battery to prevent the engine from accidentally turning over. Disconnect the ground cable (–) first and then the positive (+). When completed with the service, first connect the positive (+) cable to the p ...