The oil in the oil filter can be drained by removing the filter (see Oil Filter Replacement).
Torque - Engine Oil Drain Bolt: 29 N·m (3.0 kgf·m, 21 ft·lb)
Recommended Engine Oil
Type: API SG, SH, SJ, SL or SM with JASO MA, MA1 or MA2
Viscosity: SAE 10W-40
Capacity: 2.9 L (3.1 US qt) (when filter is not removed) 3.3 L (3.5 US qt) (when filter is removed) 3.7 L (3.9 US qt) (when engine is completely dry)
NOTE
Replace the O-ring of the oil filler plug with a new one.
Apply engine oil to the new O-ring.
Install the oil filler plug.
Torque - Oil Filler Plug: Hand-tighten
Rear Shock Absorber Removal
Remove:
Lower Fairings (see Lower Fairing Removal in the Frame
chapter)
Fuel Tank (see Fuel Tank Removal in the Fuel System
chapter)
Bolts [A] (Both Sides)
Foot Guard [B] (Both Sides)
Squeeze the brake lever slowly and hold it with a band
[A].
WARNINGBe sure to h ...
Gear Position Switch Output Voltage Inspection
NOTE
Be sure the battery is fully charged.
Turn the ignition switch to OFF.
Remove the fuel tank (see Fuel Tank Removal in the Fuel
System (DFI) chapter).
Disconnect the sidestand switch/gear position switch lead
connector [A].
Connect the measuring adapter [A] between the ...
ZX1000JB/KB Models
1. Run the fuse box 2 lead in front of the rib for the fuse box 2.
2. Seat Lock Cable
3. Hook the licence plate light lead and the left turn signal light lead on
the projection of the tool
kit case.
4. Rib for Fuse Box 2
5. Run the starter relay lead in back of the rib for the fuse box 2 ...