Kawasaki Ninja Service Manual: Engine Sprocket Removal

Sprocket, Coupling

...

Engine Sprocket Installation

Replace the sprocket washer and axle cotter pin. Install the engine sprocket onto the output shaft. Apply molybdenum disulfide oil solution to the threads and seating surface of the engine sp ...

Other materials:

Camshaft Runout Inspection
Remove the camshafts (see Camshaft Removal). Set the camshaft in a camshaft alignment jig or on V blocks. Measure the runout with a dial gauge at the specified place as shown in the figure. If the runout exceeds the service limit, replace the camshaft. Camshaft Runout Standard: TIR ...

Upper Fairing Assembly Disassembly
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal) Headlight (see Headlight Removal/Installation in the Electrical System chapter) City Light (LED) (see City Light (LED) Removal/Installation in the Electrical System chapter) Remove the screws [A], and separate each ...

Caliper Fluid Seal Damage
The fluid seal (piston seal) [A] is placed around the piston to maintain clearance between the pad and the disc. If the seal is in a poor condition, it could lead the pad to wear excessively or the brake to drag, which may cause the temperature of the discs or the brake fluid to increase. Re ...