Kawasaki Ninja Service Manual: Engine Top End

Radiator Hose and Pipe Inspection (coolant leak, damage, installation condition)

The high pressure inside the radiator hose can cause coolant to leak [A] or the hose to burst if the line is not properly maintained. Visually inspect the hoses for signs of deterioration. S ...

Valve Clearance Inspection

NOTE Valve clearance must be checked and adjusted when the engine is cold (at room temperature). Remove: Crankshaft Sensor Cover (see Crankshaft Sensor Removal in the Electrical System chapt ...

Other materials:

Inner Tube Inspection
Visually inspect the inner tube [A]. If there is any damage, replace the inner tube. Since damage to the inner tube damages the oil seal, replace the oil seal whenever the inner tube is replaced. NOTICE If the inner tube is badly bent or creased, replace it. Excessive bending, followed by ...

Oil Pressure Relief Valve Inspection
Remove the oil pressure relief valve (see Oil Pressure Relief Valve Removal). Check to see if the valve [A] slides smoothly when pushing it in with a wooden or other soft rod, and see if it comes back to its seat by spring [B] pressure. NOTE Inspect the valve in its assembled stat ...

Front Caliper Removal
Remove: Bolt [A] Front Wheel Rotation Sensor [B] Loosen the banjo bolt [C] at the brake hose lower end, and tighten it loosely. Unscrew the caliper mounting bolts [D], and detach the caliper [E] from the disc. NOTICE Do not loosen the caliper assembly bolts [F]. Take out only ...