Kawasaki Ninja Owners Manual: Evaporative Emission Control System (California model only)

Kawasaki Ninja Owners Manual / Maintenance and adjustment / Evaporative Emission Control System (California model only)

This system routes fuel vapors from the fuel system into the running engine or stores the vapors in a canister when the engine is stopped. Although no adjustments are required, a thorough visual inspection must be made at the intervals specified by the Periodic Maintenance Chart.

Inspection

Evaporative Emission Control System (California model only)


Spark Plugs
The standard spark plug is shown in the table. The spark plugs should be replaced in accordance with the Periodic Maintenance Chart. Spark plug removal should be done only by a competent mechan ...

Valve Clearance
Valve and valve seat wear decreases valve clearance, upsetting valve timing. NOTICE If valve clearance is left unadjusted, wear will eventually cause the valves to remain partly open; which lowe ...

Other materials:

Rocker Arm Removal
Squeeze the brake lever slowly and hold it with a band. Remove the front footpeg bracket bolts. Raise the rear wheel off the ground with the jack (see Rear Shock Absorber Removal). Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 Remove: Lower Rear Shock Absorber B ...

What Am I Responsible For?
You are responsible for maintaining your vehicle according to the maintenance schedule shown in this owner’s manual. You are responsible for notifying your dealer immediately if there is a problem, and you, as the owner, will need to authorize the dealer to inspect the unit. You will be re ...

Intake Air Pressure Sensor #2 Input Voltage Inspection
NOTE Be sure the battery is fully charged. Turn the ignition switch to OFF. Remove the air cleaner housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter). Disconnect the intake air pressure sensor #2 connector and connect the measuring adapter [A] between these con ...