Exhaust Butterfly Valve Actuator Sensor Resistance
Connections: W lead [C] ←→ BK lead [D]
Standard: 4 
6 kΩ
If the reading is out of the standard, replace the exhaust butterfly valve actuator.
If the reading within the standard, but the problem still exists, replace the ECU (see ECU Removal/Installation in the Fuel System (DFI) chapter).
Exhaust Butterfly Valve Actuator Sensor Circuit
1. ECU
2. Exhaust Butterfly Valve Actuator
Exhaust Butterfly Valve Actuator Sensor Output Voltage InspectionCaliper Fluid Seal Damage
The fluid seal (piston seal) [A] is placed around the piston
to maintain clearance between the pad and the disc. If
the seal is in a poor condition, it could lead the pad to wear
excessively or the brake to drag, which may cause the temperature
of the discs or the brake fluid to increase.
Re ...
Passenger’s Seat Removal
Remove the passenger’s seat by inserting
the ignition key into the seat
lock, and turning it clockwise.
A. Seat Lock
B. Ignition Key
C. Passenger’s seat
D. Pull up
NOTE
When removing the passenger’s
seat, pull it up while turning the key. ...
Fuel Hose Replacement
Remove the fuel tank (see Fuel Tank Removal in the Fuel
System (DFI) chapter).
WARNINGFuel is flammable and explosive under
certain conditions
and can cause severe burns. Be prepared
for fuel spillage; any spilled fuel must be completely
wiped up immediately. When the fue ...
