Inquiries to Rider
Each rider reacts to problems in different ways, so it is important to
confirm what kind of condition
the rider is dissatisfied with.
Try to find out exactly what problem occurs under exactly what
conditions by asking the rider; knowing
this information may help you reproduce the prob ...
Valve Installation
NOTICE
Do not lap the valve to the valve seat, using the
grinding compound. It will come off oxide film
treated surface of the valve.
Replace the oil seal with a new one.
Apply a thin coat of molybdenum disulfide grease to the
valve stem before valve installation.
Install the springs so ...
Front Fork Disassembly
Remove the front fork (see Front Fork Removal (Each
Fork Leg))
Drain the fork oil (see Front Fork Oil Change).
Take the dust seal [A] off the outer tube.
Remove the retaining ring [B].
Separate the outer tube from the inner tube.
Remove the following parts from the inner tube. ...