Kawasaki Ninja Service Manual: Exhaust System Identification

Kawasaki Ninja Service Manual / Engine Top End / Exhaust System Identification

Exhaust System Identification


Exhaust System Identification


Exhaust System Identification


Exhaust Pipe Mark Position [A]


Premuffler Chamber Mark Position [A]


Muffler Body Mark Position [A]


Premuffler Chamber [A] with Hole [B] for Oxygen Sensor [C]


Honeycomb Type Catalyst Position [A]


Specifications

Specifications


Exploded View
EO: Apply engine oil. G: Apply grease. L: Apply a non-permanent locking agent. M: Apply molybdenum disulfide grease. MO: Apply molybdenum disulfide oil solution. (mixture of the engine ...

Special Tools and Sealant
Compression Gauge, 20 kgf/cm²: 57001-221 Valve Spring Compressor Assembly: 57001-241 Valve Spring Compressor Adapter, 25: 57001-1019 Valve Seat Cutter, 45° - 27.5: 57001-1114 Valve ...

Other materials:

Master Cylinder Rubber Parts Replacement
Front Master Cylinder Disassembly Remove the front master cylinder (see Front Master Cylinder Removal in the Brakes chapter). Remove the seal cover [A], circlip [B], connector [C] and O-ring [D]. Special Tool - Inside Circlip Pliers: 57001-143 Unscrew the locknut [E] and pivot bolt ...

KIBS Warning Indicator Light (For models equipped with KIBS)
The yellow warning indicator light in the meter unit functions as the KIBS warning indicator light. The yellow warning indicator light and warning symbol “KIBS” go on if there is a malfunction in the KIBS system. When the warning light is on, the KIBS system stops functioning. However, th ...

Shift Fork Guide Pin/Drum Groove Wear Inspection
Measure the diameter of each shift fork guide pin [A], and measure the width [B] of each shift drum groove. If the guide pin on any shift fork is less than the service limit, the fork must be replaced. Shift Fork Guide Pin Diameter Standard: 6.9 7.0 mm (0.272 0.276 in.) Service Limit: ...