Kawasaki Ninja Service Manual: External Shift Mechanism

Gear Dog and Gear Dog Hole Damage Inspection

Visually inspect the gear dogs [A] and gear dog holes [B]. Replace any damaged gears or gears with excessively worn dogs or dog holes. ...

Shift Pedal Removal

Remove: Shift Lever Bolt [A] Front Footpeg Bracket Bolts [B] If the tie-rod [C] is to be removed from the shift pedal and the shift lever, loosen the tie-rod locknuts [D]. The front tie-ro ...

Other materials:

Armature Inspection
Using the × 1 Ω hand tester range, measure the resistance between any two commutator segments [A]. Special Tool - Hand Tester: 57001-1394 If there is a high resistance or no reading (∞) between any two segments, a winding is open and the starter motor must be replaced. ...

Wheel Rotation Sensor Rotor Inspection
Remove: Wheels (see Front/Rear Wheel Removal in the Wheels/Tires chapter) Brake Disc Mounting Bolts [A] Sensor Rotor [B] Front Wheel [C] Rear Wheel [D] Visually inspect the wheel rotation sensor rotor. If the rotor is deformed or damaged (chipped teeth [A]), replace the ...

Moving Off
Check that the side stand is up. Pull in the clutch lever. Shift into 1st gear. Open the throttle a little, and start to let out the clutch lever very slowly. As the clutch starts to engage, open the throttle a littlemore, giving the engine just enough fuel to keep it from stallin ...