Kawasaki Ninja Service Manual: External Shift Mechanism Removal

Shift Pedal Installation

Install the rubber damper to the shift pedal. Turn the chamfered side to inside. Assemble: Shift Lever [A] and Locknut [B] (Left-hand Thread) Shift Pedal [C] and Locknut [D] Tie-Rod [E ...

External Shift Mechanism Installation

Install the gear positioning lever [A] as shown in the figure. Install: Spring [B] Washer [C] Tighten: Torque - Gear Positioning Lever Bolt [D]: 12 N·m (1.2 kgf·m, 106 in·lb) ...

Other materials:

Clutch Installation
Apply engine oil to the needle bearing [A] and the sleeve [B]. Install: Needle Bearing Sleeve Install the clutch housing [A]. Fit the holes [B] and projections [C]. Engage the clutch housing gear and the crankshaft primary gear. Install the spacer [A] and the clutch ...

Precautions
1) No need of topping-up No topping-up is necessary in this battery until it ends its life under normal use. Forcibly prying off the seal cap to add water is very dangerous. Never do that. 2) Refreshing charge. Give refresh charge for 5 to 10 hours with charge current shown in the text (see ...

Passenger’s Seat Installation
Insert the tab on the rear of the passenger’s seat into the slot in the frame. Insert the projections at the front of the passenger’s seat into the holes on the frame. Push down the front part of the passenger’s seat until the lock clicks. A. Passenger’s Seat B. Proj ...