Kawasaki Ninja Service Manual: Fairings

Kawasaki Ninja Service Manual / Frame / Fairings

Rear Seat Installation
Place the seat hook [A] to the slot [B] under the rear frame rear. Insert the seat latches [C] into the latch holes [D]. Push down the seat until the lock clicks. ...

Lower Fairing Removal
Remove the quick rivets [A]. Remove: Quick Rivets [A] Bolts [B] Pull up the core by the flat-head screwdriver (–), and then remove the quick rivet. Clear the hook portions o ...

Other materials:

Side Stand
The motorcycle is equipped with a side stand. A. Side Stand NOTE When using the side stand, turn the handlebar to the left. Do not sit on the motorcycle while it is on its side stand or centre stand. Always kick the stand fully up before sitting on the motorcycle. NOTE The motorcycl ...

Switch Inspection
Using a hand tester, check to see that only the connections shown in the table have continuity. Special Tool - Hand Tester: 57001-1394 For the switch housings and the ignition switch, refer to the tables in the Wiring Diagram. If the switch has an open or short, repair it or replace it w ...

Turn Signal Switch
When the turn signal switch is pushed to the left ( ) or right ( ), the corresponding turn signals blink on and off. To stop blinking, push the switch in. Horn Button When the horn button is pushed, the horn sounds LAP/Passing Button When the LAP/passing button is pushed, the headlight hi ...