Kawasaki Ninja Service Manual: Final Drive

Kawasaki Ninja Service Manual / Final Drive

Hub Bearing Inspection
Since the hub bearings are made to extremely close tolerances, the clearance can not normally be measured. NOTE Do not remove any bearings for inspection. If any bearings are removed, they will ne ...

Exploded View
HG: Apply high-temperature grease. HO: Apply heavy oil. L: Apply a non-permanent locking agent. MO: Apply molybdenum disulfide oil solution. (mixture of the engine oil and molybden ...

Other materials:

Catalytic Converter
This motorcycle is equipped with a catalytic converter in the exhaust system. The converter reacts with carbonmonoxide, hydrocarbons and nitrogen oxides to convert them into carbon dioxide, water, nitrogen and oxygen resulting in much cleaner exhaust gases to be discharged into the atmosphe ...

Clutch Plate, Wear, Damage Inspection
Visually inspect the friction and steel plates for signs of seizure, overheating (discoloration), or uneven wear. Measure the thickness of each friction plate [A] at several points. If any plates show signs of damage, or if they have worn past the service limit, replace them with new on ...

Compression Damping Force Adjustment
There are two adjustments you can make to the compression damping force. High Speed Compression Damping Adjuster [A] Low Speed Compression Damping Adjuster [B] To adjust the high speed compression damping force, turn the outside damping adjuster with a wrench to the desired position ...