Kawasaki Ninja Service Manual: Footpeg

Kawasaki Ninja Service Manual / Frame / Footpeg

Footpeg Height Adjustment

Footpeg Height Adjustment


Footpeg Height Adjustment


NOTE

Install the front footpegs with same height on both sides.

Tighten: Torque - Front Footpeg Bracket Bolts: 25 N·m (2.5 kgf·m, 18 ft·lb)

Footpeg Height Adjustment


Sidestand Installation
Replace the sidestand nut [A] with a new one. Apply grease to the sliding areas [B]. Tighten the sidestand bolt [C] first, and then the sidestand nut. Torque - Sidestand Bolt: 44 N·m (4.5 ...

Electrical System
...

Other materials:

Location of labels
All warning labels which are on your vehicle are repeated here. Read labels on your vehicle and understand them thoroughly. They contain information which is important for your safety and the safety of anyone else who may operate your vehicle. Therefore, it is very important that all warning ...

Rear Wheel Rotation Sensor Signal (Service Code 24)
Rear Wheel Rotation Sensor Signal Inspection The rear wheel rotation sensor sends the signal to the ECU through the KIBS hydraulic unit (KIBS equipped models). For other than KIBS equipped models, the signal is sent directly to the ECU. The ECU uses the rear wheel rotation sensor signal for mo ...

Windshield and Other Plastic Parts
After washing use a soft cloth to gently dry plastic parts. When dry, treat the windshield, headlight lens, and other nonpainted plastic parts with an approved plastic cleaner/polisher product. NOTICE Plastic parts may deteriorate and break if they come in contact with chemical substances ...