Kawasaki Ninja Service Manual: Frame

Handlebar Installation

Apply a non-permanent locking agent to the threads of the handlebar positioning bolts and tighten them. Torque - Handlebar Positioning Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb) Install the steeri ...

Exploded View

10. US, CA, CAL and AU Models 11. ZX1000JD/KD G: Apply grease. L: Apply a non-permanent locking agent. R: Replacement Parts S: Follow the specified tightening sequence. 1. US, CA ...

Other materials:

Brake Line Bleeding
The brake fluid has a very low compression coefficient so that almost all the movement of the brake lever or pedal is transmitted directly to the caliper for braking action. Air, however, is easily compressed. When air enters the brake lines, brake lever or pedal movement will be partially used ...

Seat Cover Removal
Remove: Rear Seat (see Rear Seat Removal) Remove the bolts [A]. Remove the upper seat cover backward [B] to clear the hook portions. Remove: Front Seat (see Front Seat Removal) Quick Rivets [A] Bolts [B] Seat Covers [C] ...

Coupling Bearing Installation
Replace the bearing with a new one. Press in the bearing [A] until it is bottomed. Special Tool - Bearing Driver Set [B]: 57001-1129 Pack the bearing with high-temperature grease. Replace the circlip with a new one. Special Tool - Inside Circlip Pliers: 57001-143 Replace the grease se ...