Kawasaki Ninja Service Manual: Fuel Injector Resistance Inspection

Fuel Injector Audible Inspection

NOTE Be sure the battery is fully charged. The secondary fuel injectors are operating with following conditions. 1. The engine speed is more than 6 000 r/min (rpm). 2. The throttle openi ...

For Primary Fuel Injectors

Remove the air cleaner housing (see Air Cleaner Housing Removal). Disconnect the primary fuel injector connector [A]. Connect a digital meter to the terminals in each primary fuel i ...

Other materials:

Transmission Assy Assembly
Install the ball bearing [A] until it is bottomed. Turn the oil seal side to the bottom. Special Tool - Bearing Driver Set: 57001-1129 Install the bearing holder [B]. Turn the flat side to the bottom. Apply a non-permanent locking agent to the bearing holder bolts [C]. Tighten: ...

Self-Diagnosis Outline
The self-diagnosis system is monitoring the following mechanisms. DFI System and Ignition System S-KTRC System Immobilizer System (Equipped Models) KIBS and ABS (Equipped Models) ESD (Electronic Steering Damper) System (ZX1000JD/KD) The following warning indicator lights (LED) are used for ...

Wheel Bearing Damage Inspection
Raise the front wheel off the ground with the jack (see Front Wheel Removal in the Wheels/Tires chapter). Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 Turn the handlebar all the way to the right or left. Inspect the roughness of the front wheel bearing by moving [A] ...