Kawasaki Ninja Service Manual: Fuel Pump Installation

Kawasaki Ninja Service Manual / Fuel System (DFI) / Fuel Pump / Fuel Pump Installation

Fuel Pump Installation


Torque - Fuel Pump Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)

Fuel Pump Installation


Fuel Pump Installation


Fuel Pump Removal
WARNINGGasoline is extremely flammable and can be explosive under certain conditions, creating the potential for serious burns. Make sure the area is well-ventilated and free from ...

Fuel Pump Operation Inspection
NOTE Be sure the battery is fully charged. Turn the engine stop switch to run position. Turn the ignition switch to ON and make sure that the fuel pump operates (make light sounds) for 3 seco ...

Other materials:

Clutch Plate Warp Inspection
Place each friction plate or steel plate on a surface plate and measure the gap between the surface plate [A] and each friction plate or steel plate [B] with a thickness gauge [C]. The gap is the amount of friction or steel plate warp. If any plate is warped over the service limit, repla ...

Throttle Control System
Check the throttle grip play each day before riding the motorcycle, and carry out maintenance and adjustments in accordance with the Periodic Maintenance Chart. Adjust it if necessary. Throttle Grip The throttle grip controls the butterfly valves in the throttle body. If the throttle grip ha ...

Front Fork Installation (Each Fork Leg)
Install the fork so that the top plug end [A] as shown in the figure. 11 mm (0.43 in.) [B] Steering Stem Head [C] Tighten: Torque - Front Fork Clamp Bolts (Lower): 23 N·m (2.3 kgf·m, 17 ft·lb) NOTE Tighten the two lower front fork clamp bolts alternately two times to ensur ...