Fuses are arranged in the fuse boxes located under the passenger’s seat and in the left fairing. The main fuse is located under the passenger’s seat.
If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage.
The main fuse removal should be done by an authorized Kawasaki dealer.
A. Fuse Box
A. Fuse Box
B. Fuse Box (for models equipped with KIBS)
C. Main Fuse
WARNING Substituting fuses can cause wiring to overheat, catch fire and/or fail. Do not use any substitute for the standard fuse. Replace the blown fuse with a new one of the correct capacity, as specified on the fuse box and main fuse. |
A. Normal
B. Failed
Crankshaft Sensor Installation
Apply a non-permanent locking agent to the crankshaft
sensor bolts [A].
Tighten:
Torque - Crankshaft Sensor Bolts: 5.9 N·m (0.60 kgf·m, 52
in·lb)
Using a high flash-point solvent, clean off any oil or dirt
that may be on the silicone sealant coating area. Dry
them with a clean cl ...
Stem, Stem Bearing Removal
Remove:
Upper Fairing Assembly (see Upper Fairing Assembly
Removal in the Frame chapter)
Front Fender (see Front Fender Removal in the Frame
chapter)
Front Wheel (see Front Wheel Removal in the
Wheels/Tires chapter)
Steering Stem Head with Handlebars (see Handlebar
Removal)
Fron ...
Passenger’s Seat Installation
Insert the tab on the rear of the passenger’s
seat into the slot in the
frame.
Insert the projections at the front of
the passenger’s seat into the holes
on the frame.
Push down the front part of the passenger’s
seat until the lock clicks.
A. Passenger’s Seat
B. Proj ...