Kawasaki Ninja Owners Manual: Gear Position Indicator

Kawasaki Ninja Owners Manual / General information / Meter instruments / Multifunction Meter / Gear Position Indicator

The gear position indicator shows the corresponding gear positions where the transmission is shifted.

For example, when the transmission is in 6th gear, “6” is displayed.

Gear Position Indicator


A. Gear Position Indicator (Normal mode)

NOTE

If the gear position is in the neutral position, the gear position is disappears and the neutral indicator light goes on.

Intake Air Temperature Meter
Intake air temperature meter indicates temperature of the air in the air cleaner case. The “Intake Air” is displayed if the intake air temperature meter is selected. A. Intake Air Tempe ...

Race Mode Display
This mode gives priority to reading the gear position rather than the speedometer reading. The gear position indicator can be displayed at the position of the speedometer on the normal mode. A ...

Other materials:

Radiator and Radiator Fan Installation
If the radiator bracket [A] was removed, install it. Install the radiator fan to the radiator Tighten the radiator fan mounting bolts. When installing the pad [B], install it so that the upper end of the pad aligns with the corner top [C]. When install the pad [D], install it so that the ...

KIBS Motor Relay Inspection (Service Code b 35)
Check the KIBS motor relay fuse (25 A) [A] (see Fuse Inspection in the Electrical System chapter) If the fuse is good, check the wiring continuity as follows. Disconnect: Battery Positive Cable (see Battery Removal in the Electrical System chapter) KIBS Hydraulic Unit Lead Connector (see ...

Seat Cover Installation
Installation is the reverse of removal. Note the following. When installing the pad [A], install it along the corner [B] as shown in the figure. When installing the pad [C], align the ends [D], along the corner [E], and wrap [F] the upper edge of the seat cover. Install the damper [A] ...