Kawasaki Ninja Service Manual: Guard

Windshield

Windshield Removal Remove: Bolts [A] and Washers Windshield [B] Windshield Installation Be sure to install the wellnuts [A] and the washers. Tighten: Torque - Windshield Mounti ...

Mud Guard Removal

Remove: Mud Guard Mounting Bolts [A] Clamp (Right Side) Brake Hose Banjo Bolt of Rear Caliper Side (see Rear Caliper Removal in the Brakes chapter) Mud Guard [B] ...

Other materials:

Parking
WARNINGOperating or parking the vehicle near flammable materials can cause a fire, and can result in property damage or severe personal injury. Do not idle or park your vehicle in an area where tall or dry vegetation, or other flammable materials could come into cont ...

Timing Rotor Installation
Install the timing rotor [A] on the crankshaft [B] with their teeth [C] aligned. Holding the timing rotor with the flywheel & pulley holder and tighten the bolt. Torque - Timing Rotor Bolt: 39 N·m (4.0 kgf·m, 29 ft·lb) Special Tool - Flywheel & Pulley Holder: 57001-1605 I ...

Mud Guard Installation
Installation is the reverse of removal. Note the following. Run the hose and lead correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter). Check the brake line. Apply a non-permanent locking agent to the threads of the mud guard mounting bolts [A, B], and tighten them ...