Kawasaki Ninja Service Manual: Headlight Removal/Installation

Headlight Bulb Replacement

Turn the cover [A] counterclockwise, and remove it. Disconnect the headlight connector [A]. Open the clamp [B], and remove the bulb. NOTICE When handling the quartz-halogen bulb, ne ...

City Light (LED) Removal/Installation

Remove: Upper Fairing Assembly (see Upper Faring Assembly Removal in the Frame chapter) Headlight (see Headlight Removal) Remove the screws [A], and take the city light [B] off the upper ...

Other materials:

Valve Installation
NOTICE Do not lap the valve to the valve seat, using the grinding compound. It will come off oxide film treated surface of the valve. Replace the oil seal with a new one. Apply a thin coat of molybdenum disulfide grease to the valve stem before valve installation. Install the springs so ...

Safe riding technique
The points given below are applicable for everyday motorcycle use and should be carefully observed for safe and effective vehicle operation. For safety, eye protection and a helmet are strongly recommended. You should be aware of and verify the applicable safety regulations in force prior ...

Valve Seat Repair
Repair the valve seat with the valve seat cutters [A]. Special Tools - Valve Seat Cutter Holder Bar [B]: 57001 -1128 Valve Seat Cutter Holder, 4.5 [C]: 57001 -1330 [For Exhaust Valve Seat] Valve Seat Cutter, 45° - 27.5: 57001-1114 Valve Seat Cutter, 32° - 28: 57001-1119 Valve Seat ...