Kawasaki Ninja Service Manual: Hub Bearing

Kawasaki Ninja Service Manual / Wheels/Tires / Hub Bearing

Tire Repair
Currently two types of repair for tubeless tires have come into wide use. One type is called a temporary (external) repair which can be carried out without removing the tire from the rim, and the o ...

Hub Bearing Removal
Remove the wheels (see Front/Rear Wheel Removal), and take out the following. Collars Coupling (Out of rear hub) Grease Seals Use the bearing remover to remove the hub bearings [A]. ...

Other materials:

Special Tools and Sealants
Outside Circlip Pliers: 57001-144 Piston Pin Puller Assembly: 57001-910 Piston Ring Compressor Grip: 57001-1095 Piston Ring Compressor Belt, 67 79: 57001-1097 Bearing Driver Set: 57001-1129 Liquid Gasket, TB1216B: 92104-1064 Liquid Gasket, TB1207B: 92104-2068 ...

Master Cylinder Inspection (Visual Inspection)
Remove the master cylinders (see Front/Rear Master Cylinder Removal). Disassemble the front and rear master cylinders (see Master Cylinder Rubber Parts Replacement in the Periodic Maintenance chapter). Check that there are no scratches, rust or pitting on the inner wall [A] of each ma ...

Front Fork Assembly
Replace the following parts with new ones. Slide Bushing Guide Bushing Oil Seal Install the following parts to the inner tube [A]. Dust Seal [B] Retaining Ring [C] Apply grease to the oil seal lips. Install the oil seal [A] so that the stamp side faces lower side. Insta ...