| WARNING The ignition system produces extremely high voltage. Do not touch the spark plug, ignition coil or ignition coil lead while the engine is running, or you could receive a severe electrical shock. |
NOTICE
Do not disconnect the battery cables or any other electrical connections when the ignition switch is ON, or while the engine is running. This is to prevent ECU damage.
Do not install the battery backwards. The negative side is grounded. This is to prevent damage to the ECU.
Regulator/Rectifier Inspection
Crankshaft Sensor RemovalOxygen Sensor Installation (Equipped Models)
NOTICE
Never drop the oxygen sensor [A] especially on a
hard surface. Such a shock to the unit can damage
it. Do not touch the sensing part [B] to prevent oil
contact. Oil contamination from hands can reduce
sensor performance.
Tighten:
Torque - Oxygen Sensor: 25 N·m (2.5 kgf·m, 18 ...
Power Mode Indicator
This indicator shows the selected
Power Mode. For more detailed information
about the power mode, see
power mode section in the How to Ride
the Motorcycle chapter.
A. Power Mode Indicator
NOTE
When all power mode indicators go
off, the battery voltage is insufficient.
Have the machine ...
Special Tools and Sealants
Outside Circlip Pliers:
57001-144
Piston Pin Puller Assembly:
57001-910
Piston Ring Compressor Grip:
57001-1095
Piston Ring Compressor Belt, 67
79:
57001-1097
Bearing Driver Set:
57001-1129
Liquid Gasket, TB1216B:
92104-1064
Liquid Gasket, TB1207B:
92104-2068
...