Kawasaki Ninja Service Manual: Immobilizer Amplifier (Service Code 35, Equipped Models)

Exhaust Butterfly Valve Actuator Sensor Resistance Inspection

Turn the ignition switch to OFF. Disconnect the exhaust butterfly valve actuator sensor connector (3 pins connector) [A] (see Exhaust Butterfly Valve Actuator Sensor Input Voltage Inspection) ...

Antenna Resistance Inspection

Turn the ignition switch to OFF. Remove the air cleaner housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter). Disconnect the antenna lead connector [A]. Measure the an ...

Other materials:

Drive Chain Slack Inspection
Refer to the Drive Chain Slack Inspection in the Periodic Maintenance chapter. Drive Chain Slack Adjustment Refer to the Drive Chain Slack Adjustment in the Periodic Maintenance chapter. Wheel Alignment Inspection/Adjustment Refer to the Wheel Alignment Inspection in the Periodic Maintenance ...

Information for Coolant
To protect the cooling system (consisting of the aluminum engine and radiator) from rust and corrosion, the use of corrosion and rust inhibitor chemicals in the coolant is essential. If coolant containing corrosion and rust inhibitor chemicals are not used, over a period of time, the cooling ...

Lap Counter/Coolant/Intake Air Temperature Meter
This meter shows the coolant temperature, the intake air temperature or the lap number. The lap number is displayed in the stop watch mode, refer to the “Stop Watch” item in this section. A. Lap Counter/Coolant / Intake Air Temperature Meter The coolant temperature meter and inta ...