Intake air temperature meter indicates temperature of the air in the air cleaner case.
The “Intake Air” is displayed if the intake air temperature meter is selected.
A. Intake Air Temperature Meter
B. “Intake Air”
NOTE
The intake air temperature meter shift to the coolant temperature meter automatically if the coolant temperature rises to above 115°C (239°F). In this case, the meter cannot be shifted to the intake air temperature meter until the red warning indicator light goes off.
Coolant Temperature Meter
Gear Position IndicatorGeneral Lubrication
Lubricate the points shown below,
with either motor oil or regular grease,
in accordance with the Periodic Maintenance
Chart or whenever the vehicle
has been operated under wet or rainy
conditions.
Before lubricating each part, clean off
any rusty spots with rust remover and
wipe off any g ...
Exhaust Butterfly Valve Cable Installation
Confirm whether pulley [A] is an angle shown in the figure.
41.7° ±7° [B]
This position is original position of the pulley.
NOTE
Correct the position electrically after confirming the use
is discontinued and there is no damage when differing
from the angle of shown in the figure.
...
KIBS System Circuit
1. Ignition Switch
2. Front Wheel Rotation Sensor
3. Front Brake Light Switch
4. Joint Connector C
5. Joint Connector D
6. ECU
7. Rear Wheel Rotation Sensor
8. Rear Brake Light Switch
9. Battery 12 V 8.6 Ah
10. Main Fuse 30 A
11. KIBS Motor Relay Fuse 30 A
12. KIBS Solenoid Valve Rela ...