NOTICE
Never drop the intake air temperature sensor especially on a hard surface. Such a shock to the sensor can damage it.
Intake Air Temperature Sensor InstallationSystem Components
1. KIBS ECU
With input from the front and rear wheel sensors and front
caliper hydraulic pressure, the KIBS ECU analyzes various
conditions on the motorcycle, and with additional information
from the FI ECU (engine speed, throttle position, gear
position, and clutch actuation) precisely control ...
Rear Sprocket Removal
Remove the rear wheel (see Rear Wheel Removal in the
Wheels/Tires chapter).
NOTICE
Do not lay the wheel on the ground with the disc
facing down. This can damage or warp the disc.
Place blocks under the wheel so that the disc does
not touch the ground.
Remove:
Rear Sprocket Nu ...
Sidestand Installation
Replace the sidestand nut [A] with a new one.
Apply grease to the sliding areas [B].
Tighten the sidestand bolt [C] first, and then the sidestand
nut.
Torque - Sidestand Bolt: 44 N·m (4.5 kgf·m, 32 ft·lb)
Sidestand Nut: 29 N·m (3.0 kgf·m, 21 ft·lb)
Install the spring [D] as sh ...
