Kawasaki Ninja Service Manual: Intake Air Temperature Sensor (Service Code 13)

Kawasaki Ninja Service Manual / Self-Diagnosis System / Intake Air Temperature Sensor (Service Code 13)

Intake Air Pressure Sensor #1 Output Voltage Inspection
Measure the output voltage at the intake air pressure sensor #1 in the same way as input voltage inspection, note the following. Disconnect the intake air pressure sensor #1 connector and c ...

Intake Air Temperature Sensor Removal
NOTICE Never drop the intake air temperature sensor especially on a hard surface. Such a shock to the sensor can damage it. Remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI ...

Other materials:

Nozzle Assy Assembly
Before assembling, blow away dirt or dust from the delivery pipes [A] by applying compressed air [B]. Replace the O-rings [A] of the joint pipe [B] with new ones. Apply engine oil to the new O-rings, and insert it to the delivery pipes [C] Insert the joint pipe so that the step ...

KIBS Equipped Models
1. Clutch Cable 2. Vacuum Hose (Equipped Models) 3. Left Switch Housing Lead 4. Main Harness 5. Front Brake Hose 6. Throttle Cables 7. Right Switch Housing Lead 8. Bracket (Hold the brake pipes.) 9. Run the meter lead to outside of the meter bracket. 10. Run the vacuum hoses to inside o ...

Fuel Pressure Inspection
NOTE Be sure the battery is fully charged. Remove: Fuel Tank Covers (see Fuel Tank Removal) Fuel Tank Bolts (see Fuel Tank Removal) Primary Fuel Hose (see Fuel Hose Replacement in the Periodic Maintenance chapter) Be sure to place a piece of cloth around the fuel outlet pipe of the ...