A sealed battery can fully display its performance only when combined with a proper vehicle electric system. Therefore, replace a sealed battery only on a motorcycle which was originally equipped with a sealed battery.
Be careful, if a sealed battery is installed on a motorcycle which had an ordinary battery as original equipment, the sealed battery’s life will be shortened.
Brake Pedal Installation
Apply grease to the brake pedal pivot shaft [A].
Install:
Washers [B]
Brake Pedal [C]
Apply a non-permanent locking agent to the threads of
the brake pedal mounting bolt [D], and tighten it.
Torque - Brake Pedal Mounting Bolt: 8.8 N·m (0.90 kgf·m,
78 in·lb)
Install the re ...
Radiator and Radiator Fan Installation
If the radiator bracket [A] was removed, install it.
Install the radiator fan to the radiator
Tighten the radiator fan mounting bolts.
When installing the pad [B], install it so that the upper end
of the pad aligns with the corner top [C].
When install the pad [D], install it so that the ...
Turn Signal Switch
When the turn signal switch is
pushed to the left ( ) or right
( ), the corresponding turn signals
blink on and off.
To stop blinking, push the switch in.
Horn Button
When the horn button is pushed, the
horn sounds
LAP/Passing Button
When the LAP/passing button is
pushed, the headlight hi ...